1800 W WindZilla PMA 12 V AC 6 Blade Wind Turbine Generator + Charge Controller

This model is Specifically designed to work with our WindZilla PMA:

WindZilla PMA is included.
12V charge controller is included.
Slip Ring is NOT Included.

Introduction

Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. Home owners have since adpoted to DIY wind projects. However, the task of building a wind turbine from ground up is no easy task. Most DIY wind turbines availalbe in the market today have a lot of mechanical flaws. Flaws that were never addressed will result in frequent maintenance and headaches, which eventually leads to abandonment / cancelation of the project. Since there are a lot of room for imporovment, we have designed a new wind turbine - the Patriot to bring things up to par. To name a few, Anti vibration system to increase power efficiency. More details / features will be available below:

Exploded View

Generator Specification:

The above battery charging power curve is obtained from charging a 12V 88Ah battery bank with our SolarWind Hybrid Charge Controller. (not included in this listing)

What is the difference in a Windzilla Wind Turbine?

GreenergyStar's WindZilla Wind Turbine is the most lightweight and easily assembled generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other GreenergyStar branded products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features:

I. Exceptional Body Design

With Dual Bearing - Dual Metal ball bearing to prevent vertical vibration - Yaw shaft diameter: 40mm - 3cm of stabilizing distance with 2 bearings - No vibration = Increase in efficiency - Reduction in noise output - One piece design Yaw body provides more stability	Without Tower Adapter / Bearing - When there is no tower adapter, it makes installation harder than it has to be -Without bearing, metal connection / joints will grind on each other and wear out - Plays will get larger and turbine will vibrate during operation

Anti-Leak System

Pros - Exceptional Body Design to protect Slip Ring (not included) and Tower Adapter - Bearings are covered and will not rust / leak / short circuit

Pros
- Compensates thrust forces from incoming wind
- 5 degree Tilt Angle ensures the blades will never hit the tower during strong wind

II. Blades, Hub

- Color: Black
- With 62" swept area when mounted on a 5.5" Hub
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Can generate 800 watts or more depending on PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjusters / shims (see picture below)
- High resistance to bending (over 150 degrees)

What is Nylon 6.6?

Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.

Nylon is extremely versatile in its applications. It is highly resistant to abrasion and has excellent resilience.
Within nylon, there are two groups: nylon 6 and nylon 6.6. Nylon 6.6 is the premium thermoplastic. It is the thermoplastic that is most often specified by professional architects and designers because it provides the flexural strength, low-temperature toughness, UV Resistance and is the most resilient. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.

Adjustable blade degree with included degree adjusters (Shims)

Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle = More Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque, More Speed

Specification

Hub Specifications:

III. Stay true to wind with Light Weighted Body and Stylish Tail

Body Specifications:

Tail Specifications:

IV. Rebuildable, Perfect DYI Project

What are included:

- 1 WindZilla Wind Turbine
- 6x Blades
- Hub with 6 lots
- Body Plates
- Tail
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual

Specification

WARNING !!!

Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.

The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products

Warranty:

We will warrant this unit against any manufacture defects or workmanship for 1 year from the date of purchase. This limited warranty specifically excludes damage caused by improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.

NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND