Introduction WindRex Permanent Magnet Generator. It is the major component in a small wind / hydro / Fitness Bike electric generation system. This generator is perfect for enthusiast who are interested in a DIY Wind Turbine Project.
Installation: Unlike conventional generators in the market where you have to tie it down to a brace, or use super glue to stabilize it, our generator has foot mount for easy installation. All you need is 4 bolts to secure the unit to whatever you like. And you will never have to spend extra money on mounts.
Video showing our bench test of the alternator at ~1950RPM
Generator Specification:
|
Voltage |
12/24 VDC |
|
Permanent Magnet |
Ceramic magnets (Ferrite) |
|
Moisture /Corrosion Resistance |
Yes, sealed exterior, ball bearing, coated rotor |
|
Shaft Diameter |
11.1mm, 7/16 inch |
|
Pinion Gear |
11T |
|
Body Material |
Aluminium Alloy & Steel |
|
Rotor Diameter |
10cm (4 inches) |
|
Length |
8cm (3.14 inches) |
|
Weight |
1.94kg (4.25 lbs) |
|
Mount |
Yes, Foot Mount |
|
Cable Length |
approx. 33cm (13inch) |
|
Rotation |
Bi-directional, recommend clockwise |
|
WARNING !!!
Rotating turbines present a serious mechanical hazard that can cause serious injury. Under no circumstances should you install the turbine where a person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these turbines. We assume no liability for ANY injuries caused by these products.
NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE |